| DodgeRam.info > TSB's > 09-006-04 |
| Visit Geno's Garage for Truck accessories. |
![]() |
Date: February 17, 2004
Models: 2003 (DR) Ram Truck
NOTE: This Bulletin Applies To Vehicles Equipped With 5.7L Engines.
Overview:
This bulletin involves replacing the engine oil pump pick up tube.
Symptom/Condition:
Some customers may intermittently experience an oil pressure gauge indicating
low oil pressure at start up in below freezing temperatures.
Diagnosis:
If customers indicate that the condition is present, perform the
Repair Procedure.
Parts Required:
| Qty. | Part No. | Description |
| 1 | 53021522AD | Oil Pump Pick Up Tube |
Special Tools/Equipment Required:
| 8534 | Engine Support Tool |
Repair Procedure:
| 1. | Using the procedures outlined in the 2003 Ram Truck Service Manual, publication number 81-370-03059, section 9 page 218, Remove thew engine oil pump and pick up tube. |
| 2. | Check the oil pressure relief valve for any irregularities that could cause the valve to stick open. Repair as necessary |
| 3. | Install the new pick up tube, p/n 53021522AD. |
Policy: Reimbursable within the provisions of the warranty.
Time Allowance:
| Labor Operation No: | Description | Amount |
| 09-65-55-91 | Install Oil Pump Pick Up Tube - 4 X 2 | 2.8 Hrs. |
| 09-65-55-92 | Install Oil Pump Pick Up Tube - 4 X 4 - 1500 Series | 2.4 Hrs |
| 09-65-55-93 | Install Oil Pump Pick Up Tube - 4 X 4 - 2500/3500 Series | 1.1 Hrs |
Failure Code:
| 60 | Insufficient Lubrication |
I would like to thank Bob Bergevin, Arthur Cantrall, Barry Drodge, David Lovell, Bill Maurits, and Steve for supplying the information for these bulletins. And a big thank you goes to Geno's Garage for making DodgeRam.info possible. |
This page was edited on: May 3, 2004