DodgeRam.info > TSB's > 23-025-03

TSB 23-025-03

Scratched Aftermarket Window Tint

Visit Geno's Garage
for Truck accessories.		 Geno's Garage Truck Accessories

Date: Oct. 24, 2003

Models: 2003 (DR) Ram Truck

Overview:
This bulletin involves installing a revised door inner belt weather strip.

Symptom/Condition:
Customers who have installed aftermarket window tint film may experience the film on the windows becoming scratched from contact with the door inner bell weather strip. Some vehicles may have been bull with the weather strip not having a coating of soft protective flocking on the surface that contacts the window.

Diagnosis:
Inspect the door inner belt weather strip for the presence of a soft protective flocking on the surface that contacts the window. If the flocking is not present, perform the Repair Procedure.

Parts Required:
Qty. Part No. Description
2 55276897AC Weather Strip - Standard Cab Front
2 55276895AC Weather Strip - Quad Cab Front
2 55276896AC Weather Strip - Quad Cab Rear

 

Repair Procedure: 
1.      Remove the door trim panel.
2. Remove the inner belt weather strip from the flange on the inner door panel.
3. Install the now weather strip listed in the Parts Required section above.
4. Install the door trim panel.
5. Repeat this process for the remaining doors.

Policy:    Reimbursable within the provisions of the warranty.

Time Allowance:

Labor Operation No:   Description Amount
23-51-17-90 Install Weather Strip - Standard Cab - Both Doors 0.5 Hrs.
23-51-17-91 Install Weather Strip - Quad Cab - All Doors 0.8 Hrs.

Failure Code:

P8        New Part

I would like to thank Bob Bergevin, Arthur Cantrall, Barry Drodge, David Lovell, Bill Maurits, and Steve for supplying the information for these bulletins. And a big thank you goes to Geno's Garage for making DodgeRam.info possible.
 

  Top of Page  

  DodgeRam.info Home  

 

This page was edited on: May 3, 2004