DodgeRam.info > TSB's > 02-20-94

TSB 02-20-94

Service Manual Revision - Torque Value Change

Visit Geno's Garage
for Truck accessories.

Date: Dec 2, 1994

models: 1994 BR Ram Truck

Discussion: This TSB contains revised service manual pages. The revisions are marked with **asterisks**

Please insert the revised pages in the appropriate service manual.

Manual

Publication number

Pages

Changes

1994 Ram Truck

81-370-4108

2-48
Stabilizer link to bar torque corrected. Lower suspension arm cam nut torque corrected. Jounce bumper to bracket eliminated. No fastener at that location.

Page 2-48 Front Suspension and Axle -----------------------------------------

Front Suspension components Link Coil
Description	Torque
Track bar ball stud nut	62 ft-lb (84 Nm)
Track bar bolt	130 ft-lb (176 Nm)
Stabilizer bar Retainer bolts	35 ft-lb (47 Nm)
Stabilizer Link to axle bracket nut	27 ft-lb (37 Nm)
**Stabilizer Link to Stabilizer bar nut	87 ft-lb (118 Nm)**
Shock Absorber Bracket	55 ft-lb (75 Nm)
Shock Absorber upper nut	30 Ft-lb (41 Nm)
Shock Absorber lower bolt	100 ft-lb (135 Nm)
**Lower suspension arm cam nut	110 ft-lb (135 Nm)**
Lower suspension arm to frame nut	88 ft-lb (119 Nm)
Upper suspension arm to axle bracket nut	89 ft-lb (121 Nm)
Upper suspension arm to frame nut	62 ft-lb (84 Nm)

Front Suspension Components - IFS
Description	Torque
Jounce Bumper nut	30 ft-lb (41 Nm)
Lower suspension arm bolts	150 ft-lb (203 Nm)
Lower ball stud nut	55 ft-lb (75 Nm)
Upper suspension arm bolts	180 ft-lb (244 Nm)
Upper ball stud nut	55 ft-lb (75 Nm)
Shock Absorber upper nut	30 Ft-lb (41 Nm)
Shock Absorber lower bolt	100 ft-lb (135 Nm)
Stabilizer bar Retainer bolts	35 ft-lb (47 Nm)
Stabilizer Link to axle bracket nut	25 ft-lb (34 Nm)

Model 44 Axle
Description	Torque
Fill hole plug	25 ft-lb (34 Nm)
Differential cover bolts	35 ft-lbs (47 Nm)
Bearing Cap Bolts	70 to 90 ft-lb (95 to 122 Nm)
Pinion yoke nut	180 to 200 ft-lb (216 to 271 Nm)
Ring gear bolts	70 to 90 ft-lb (95 to 122 Nm)
Shift motor housing bolts	8 ft-lbs (11 Nm)
Axle shaft nut	160 to 200 ft-lb (218 to 272 Nm)
Bearing to knuckle bolts	115 to 130 ft-lb (156 to 176 Nm)
Lower ball stud nut	80 ft-lb (108 Nm)
Upper ball stud nut	75 ft-lb (101 Nm)
RWAL/ABS sensor bolts	96 in-lb (11 Nm)

Model 60 axle
Description	Torque
Fill hole plug	25 ft-lb (34 Nm)
Differential cover bolts	31 ft-lbs (42 Nm)
Bearing Cap Bolts	70 to 90 ft-lb (95 to 122 Nm)
Pinion yoke nut	215 to 315 ft-lb (216 to 271 Nm)
Ring gear bolts	120 to 140 ft-lb (183 to 193 Nm)
Shift motor housing bolts	8 ft-lbs (11 Nm)
Axle shaft nut	160 to 200 ft-lb (218 to 272 Nm)
Bearing to knuckle bolts	115 to 130 ft-lb (156 to 176 Nm)
Lower ball stud nut	35 ft-lb (47 Nm)
Lower ball stud nut retorque	150 ft-lb (203 Nm)
Upper ball stud nut	75 ft-lb (101 Nm)
RWAL/ABS sensor bolts	96 in-lb (11 Nm)

notes: Information only.

Thanks to Bob Bergevin and Barry Drodge for supplying this TSB information

Top of Page

DodgeRam.info Home

This page was edited on: May 3, 2004

Manual	Publication number	Pages	Changes
1994 Ram Truck	81-370-4108	2-48	Stabilizer link to bar torque corrected. Lower suspension arm cam nut torque corrected. Jounce bumper to bracket eliminated. No fastener at that location.